|
|
|
基本情報
| 氏名 |
吉村 敏彦 |
| 氏名（カナ） |
ヨシムラ トシヒコ |
| 氏名（英語） |
YOSHIMURA Toshihiko |
|
 |
- FUSION INDUCED BY ENERGY-INTENSIVE MULTIFUNCTION CAVITATION IN CONJUNCTION WITH POSITRON IRRADIATION International Journal of Engineering Science Technologies 2023/07 7 3 76 86
- Effect of multifunction cavitation using phosphoric acid on fatigue and surface properties of AZ31 magnesium alloy Journal of Magnesium and Alloys 2023/05 11 6 1 9
- CAVITATION FUSION BY ENERGY-INTENSIVE MULTIFUNCTION CAVITATION IN A STRONG MAGNETIC FIELD WITH LASER LIGHT EXCITATION International Journal of Engineering Science Technologies 2023/04 7 2 1 ～ 16
- Processing of magnesium alloy by energy-intensive multifunction cavitation in a strong magnetic field with laser light excitation and associated sonoluminescence Results in Materials 2023/03 18 100391 1 11
- Effect of Multifunction Cavitation Treatment on the Surface of Thin Plates of Al Alloys Results in Materials 2022/09 16 100329 ～ 8
- MODIFYING RESIN VISCOELASTICITY BY MULTIFUNCTION CAVITATION PROCESSING IN A MAGNETIC FIELD International Journal of Engineering Science Technologies 2022/07 6 4 53
- Effect of multifunction cavitation-treated carbon steel surface on fracture toughness Journal of Materials Research and Technology 2022/06 19 3546 3553
- Characteristics of oxide film formed on cavitation-treated steel surface in water Journal of Materials Research and Technology 2022/06 19 1897 1905
- Development of processing technology using extremely high concentration cavitation energy by strong magnetic field Results in Materials 2022/05 14 100289 1 ～ 11
- ESTIMATION OF NUCLEAR FUSION REQUIREMENTS IN BUBBLES DURING ULTRA-HIGH-PRESSURE, ULTRA-HIGH-TEMPERATURE CAVITATION PROMOTED BY MAGNETIC FIELD International Journal of Engineering Science Technologies 2021/12 5 6 102 115
- Development of energy intensive multifunction cavitation technology and its application to the surface modification of the Ni-based columnar crystal superalloy CM186LC Heliyon 2021/12 7 12 e08572 ～ 11
- Improvement in the quality of the processed material surfaces lies in the moving of nozzle in the cavitation processing Surfaces and Interfaces 2021/08 25 101206 1 8
- Sonoluminescence from ultra-high temperature and pressure cavitation produced by a narrow water jet Heliyon 2021/08 7 8 1 8
- Formation of a phosphoric acid compound film on an AZ31 magnesium alloy surface using cavitation bubbles Surface and Interfaces 2021/08 25 101194 1 11
- Peening Natural Aging of Aluminum Alloy by Ultra-High-Temperature and High-Pressure Cavitation applied sciences 2021/03 11 2894 1 13
- Effect of Compressive Residual Stress on Film Formed by Mechanochemical Multifunction Cavitation Processing Materials Science Forum 2021/01 1016 574 579
- Effect of Processing Degree and Nozzle Diameter on Multifunction Cavitation Surface Engineering and Applied Electrochemistry 2021/01 57 1 101 106
- High-temperature corrosion behavior of high-temperature and high-pressure cavitation processed Cr–Mo steel surface Heliyon 2020/08 6 1 7
- Sonoluminescence from Ultra-high-temperature and High-pressure cavitation and its Effect on Surface Modification of Cr-Mo Steel Global Journal of Technology & Optimization 2020/07 11 2 1 7
- Improvement of corrosion resistance of magnesium alloy by high-temperature high-pressure cavitation treatment International Journal of Lightweight Materials and Manufacture 2019/09 2 255 260
- Stress Relaxation Behavior of Cavitation-Processed Cr–Mo Steel and Ni–Cr–Mo Steel Applied Science 2019/09 9 299 1 9
- 炭素繊維強化プラスチックの新しいリサイクル技術の開発に向けたキャビテーション加工からのアプローチ 日本機械学会論文集 2019/06 85 874 1 10
- Micro-Forging and Peening Aging Produced by Ultra-High-Temperature and Pressure Cavitation International Journal of Advancements in Technology 2019/03 10 1 1 7
- Effect of Ultrasonic Irradiation Conditions on Metal Surface during Multifunction Cavitation Materials Sciences and Applications 2018/11 9 698 704
- Thermal Stress Relaxation and High-Temperature Corrosion of Cr-Mo Steel Processed Using Multifunction Cavitation Materials 2018/09 11 2291; 1 9
- Estimation of Bubble Fusion Requirements during High-Pressure, High- Temperature Cavitation International Journal of Advancements in Technology 2018/09 9 3 1 9
- Effect of water jet peening using ultrasonic waves on pure Al and Al-Cu alloy surfaces International Journal of Lightweight Materials and Manufacture 2018/08 1 246 251
- Nano-level manufacturing by multifunction cavitation Journal of Advanced Mechanical Design, Systems, and Manufacturing 2018/08 12 5 1 8
- Sustainability of compressive residual stress on the processing time of water jet peening using ultrasonic power Heliyon 2018/08 4 e00747 1 12
- Fatigue strength improvement of aluminum alloy By cavitation processing International Journal of Scientific and Technical Research in Engineering (IJSTRE) 2018/07 3 7 46 51
- New water jet cavitation technology to increase number and size of cavitation bubbles and its effect on pure Al surface International Journal of Lightweight Materials and Manufacture 2018/03 1 12 20
- Nano-level Material Processing by Multifunction Cavitation Nanoscience & Nanotechnology-Asia 2018/01 8 1 41 54
- Evolution of surface to interior microstructure of SCM435 steel after ultrahigh-temperature and ultra-high-pressure cavitation processing Journal of Materials Processing Tech. 2018/01 251 160 ～ 167
- Surface Modification of Ni-Cr-Mo Steel by Multifunction Cavitation Journal of Materials Science and Engineering A 2017/11 A 7 11-12 290 296
- Evolution of Microstructure from the Surface to the Interior of Cr-Mo Steel by Water Jet Peening Materials Sciences and Applications 2017/09 8 708 ～ 715
- キャビテーション処理による炭素鋼からの放出ガス低減化の検討 噴流工学 2017/06 32 2 4 9
- 機械的・電気化学的キャビテーションによる酸化チタンの光触媒特性向上に関する研究 噴流工学 2016/06 32 2 10 16
- 機械的・電気化学的併用型キャビテーション技術の開発 噴流工学 2016/05 32 1 1 ～ 8
- キャビテーション加工技術の進展 噴流工学 2015/05 31 2 30 ～ 31
- Study on Improved Photocatalytic Properties of Titanium Oxide by Ejector Method Matallurgical Abstracts and Light Metals and Alloys 2015/02 47
- Nano-level processing of titanium oxide and platinum co-catalyst particles by cavitation to improve the photocatalytic properties 22nd Internaional Conference Water Jetting 2014 2014/09 295 ～ 304
- Nano-Level Surface Processing of Fine Particles by Cavitation to Improve the Photocatalytic Properties of Titanium Oxide Nanoscience & Nanotechnology-Asia 2014/09 4 1 69 ～ 78
- エジェクタ法による酸化チタンの光触媒特性向上に関する研究 噴流工学 2014/05 31 1 4 ～ 9
- メカノケミカルキャビテーション噴流による炭素鋼の耐食性向上に関する研究 噴流工学 2014/05 31 1 10 ～ 17
- IMPROVEMENT OF CORROSION RESISTANCE OF STEEL USING MECHANOCHEMICAL CAVITATION The 24th International Symposium on Transport Phenomena 2013/11 912 ～ 916
- エジェクタ法による酸化チタンの光触媒特性向上に関する研究 日本機械学会２０１３年度年次大会 講演論文集 2013/09 J212027 1 ～ 5
- メカノケミカルキャビテーション噴流による耐食性向上に関する研究 日本機械学会2012 年度年次大会講演論文集 2012/09 G040032 1 ～ 5
- Nano-cubes Produced by Electric arc Discharge and Their Compression Strength Nanoscience & Nanotechnology-Asia 2012/01 2 1 47 ～ 53
- メカノケミカルキャビテーション噴流によるバラスト水浄化に関する研究 噴流工学 2012/01 28 3 4 ～ 11
- Possible Use of Small Accelerators in Student Laboratory for Engineering Education Proceedings of the 51st Workshop of the INFN ELOISATRON Project. Held 25 October - 1 November 2008 in Erice, Italy. 2010/10 472 ～ 476
- Development of ballast water treatment technology by mechanochemical cavitation 7th International Symposium on Cavitation, Ann Arbor, Michigan, USA 2009/08
- High ductility carbon nanoball Applied Surface Science 2009/01 255 116 ～ 119
- メカノケミカルキャビテーション噴流によるバラスト水浄化技術の開発 海洋理工学会 平成２０年度秋季大会 講演論文集 2008/11 57 ～ 60
- Production of Carbon Nanoparticles and their Compression Strength Evaluation Proceedings of 9th International Conference on Modification of Materials with Particle Beams and Plasma Flows, Tomsk, Russia 2008/09 641 ～ 644
- Effect of Ultraviolet Rays to Production of Nanoparticles and Strength Evaluation of Nanoparticles XXⅡnd IUPAC SYPOSIUM ON PHOTOCHEMISTRY, Gothenburg, Sweden 2008/07 134 ～ 134
- “Effect of Ultraviolet Rays on Production of Nanoparticles and Their Strength Evaluation” Journal of the Vacuum Society of Japan 2008/01 51 3 1 ～ 5
- “気中ウォータジェットピーニング技術の開発とフレッティング疲労抑制への応用” 噴流工学 2007/01 24 1 11 ～ 17
- “ANALYSIS OF CARBON SPHERICAL SUBSTANCE GENERATED BY ARC ELECTRIC DISCHARGE” Smart Processing Technology, High Temperature Society of Japan 2006/01 1 211 ～ 215
- “蒸気凝縮キャビテーション噴流によるバラスト水浄化に関する研究” 噴流工学 2006/01 23 3 4 ～ 13
- “ANALYSIS OF CARBON SPHERICAL SUBSTANCE GENERATED BY ARC ELECTRIC DISCHARGE” Proceedings of the International Symposium on Smart Processing Technology, Osaka 2005/11 19
- “Spherical carbon particle produced by arc electric discharge” Proceedings of the 22nd International Japan-Korea Seminar on Ceramics, Nagoya 2005/11 543 ～ 546
- “ウォータジェットによるバラスト水浄化に関する研究” 噴流工学 2005/01 22 1 4 ～ 8
- “Generation of mesosize particle by arc electric discharge and ultraviolet emission” , 7th International Congress on Optical Particle Characterization, Kyoto 2004/08 61
- “Production of Carbon Mesocell by Arc Electric Discharge” Japanese Journal of Applied Physics 2004/01 43 4A １６５５ ～ １６５９
- “アーク放電法によるカーボンナノ物質の作製に関する研究” Journal of the Vacuum Society of Japan 2004/01 47 7 550 ～ 554
- “ウォータジェットピーニングにおけるキャビテーション噴流の評価とフレッティング疲労抑制への応用” 噴流工学 2004/01 21 3 16 ～ 23
- “カーボンナノチューブの電界放射測定と電界イオン顕微鏡による評価” Journal of the Vacuum Society of Japan 2004/01 47 3 140 ～ 142
- “Evaluating Fretting Fatigue Life of Titanium Alloy Dovetails Using Stress Singularity Parameters” 10th World conference on Titanium (Ti-2003), Hamburg, Germany 2003/07 5 2769 ～ 2776
- “Evaluating Fretting Fatigue Life of Compressor Dovetails by Using Stress Singularity Parameters at the Contact Edge” ASTM STP 1425 2003/01 423 ～ 433
- “原子力プラントの炉内機器に対するウォータジェットピーニング技術の開発” , 噴流工学 2003/01 20 1 4 ～ 12
- “応力特異場パラメータを用いたチタン合金のダブテールフレッティング疲労評価法” 材料の科学と工学 2003/01 40 6 41 ～ 46
- “Preventive Effect of Shot Peening on Stress Corrosion Cracking” Material Science Research International 2002/01 8 4 193 ～ 198
- “Study on modification of hydrogen trap site in nickel and stainless steel using atom probe” Journal of Vacuum Science ＆ technology, A20 4 2002/01 1450 ～ 1457
- “Study on Modification of Hydrogen Trap Site in Nickel and Stainless Steel Using Atom Probe” IUVSTA 15th International Vacuum Congress, San Francisco USA 2001/10 71
- “Fatigue Strength Evaluation Method of Compressor Dovetail Using Stress Singularity Parameter at Contact Edge” Third International Symposium on Fretting Fatigue, Nagaoka 2001/05 91
- “三次元アトムプローブによるステンレス鋼のナノレベル分析” 材料の微細組織と機能性 -２１世紀に向けて- , 日本学術振興会材料の微細組織と機能性 第133委員会 2001/01 73 ～ 78
- “Atom by Atom deuterium Distribution in the Nickel surface Layers” , 1st International Symposium on Nanoarchitectonics Using Superainteractions, Tsukuba 2000/11 145
- “ステンレス鋼溶接部の熱時効による2相分離” 鉄と鋼 1999/01 85 11 835 ～ 840
- “アトムプローブによるナノメーター領域の三次元分析” ぶんせき 1998/01 12 935
- “表面における重水素原子分布の原子レベル計測” , 真空 1998/01 41 3 210
- “Atomic Order Evaluation of Aging Degradation Process Involving Diffusional Transport of Atoms in Nanometer Scale Regions” Journal of Surface Analysis, 3 1997/01 268
- “極高真空材料の水素拡散挙動とガス放出速度の関係” 真空 1997/01 40 3 148
- “表面層における3次元化学組成の原子レベル計測” 表面 1997/01 35 11 589
- “ATOMIC-SCALE ANALYSIS OF MICROCHEMICAL CHANGES IN A NI-BASED SUPERALLOY SINGLE CRYSTAL DURING CREEP” Material Science Research International 1996/01 2 1 13
- “Effect of surface oxides on the permeation of deuterium through stainless steel” Vacuum 1996/01 47 6-8 701 ～ 704
- “Effect of surface oxides on the permiation of deuterium through stainless steel with reference to outgassing reduction in ultra- to extremely high vacuum” Vacuum 1996/01 47 4 357 ～ 361
- 2相ステンレス鋼フェライト相の酸化皮膜の原子レベル立体評価 真空 1995/09 38 9 782
- “Analysis of Aged Duplex Stainless Steel using Position-Sensitive Atom Probe” 40th International Field Emission Symposium, Nagoya 1995/08 54
- “Field ion microscope with photostimulable phosphor screen ?new approach for quantitative analysis of FIM image-” 40th International Field Emission Symposium, Nagoya 1995/08 53
- “POSAP analysis of the oxide-ally interface in stainless steel” 40th International Field Emission Symposium, Nagoya 1995/08 119
- “POSAP examination of aged cast duplex stainless steel” 40th International Field Emission Symposium, Nagoya 1995/08 53
- “POSAP study of creep coarsening in a Ni-baseed superalloy single crystal” 42th International Field Emission Symposium, Madison USA 1995/08 145
- “Atom Probe Study of the Aging Embrittlement of Cast Duplex Stainless Steel” JSME International Journal, Series A 1995/01 38 3 384
- “Atom Probe-Field Ion Microscopy and Mossbauer Spectroscopy of Low Temperature Phase Decomposition in a Ferritic Stainless Steel” Materials Transaction, JIM 1995/01 36 1 16
- “Effect of nanometer size Cr-depleted Fe-rich region on passivity breakdown” Materials Science Forum 1995/01 185-188 985 ～ 990
- “Importance of the surface oxide layer in the reduction of outgassing from stainless steels” Journal of Vacuum Science ＆ technology 1995/01 13 4 1847 ～ 1852
- ステンレス鋼の重水素透過に及ぼす表面酸化層の影響 真空 1995/01 38 9 9 ～ 20
- “Analysis of Oxide Film on Stainless Steel via Position Sensitive Atom Probe” Journal of Vacuum Science ＆ technology, A12 4 1994/01 2544
- “Atomic-Order 3-D Compositional Determination of the Surface Oxide Layers Formed on Stainless Steel with Special Reference to Preparation of Extremely Low Outgassing Surface” Journal of the Vacuum Society of Japan 1994/01 37 9 776
- “Electrochemical and atom probe studies of cast and aged duplex stainless steel” Mat. Tran. JIM 1994/01 35
- “Field ion microscope with photostimulable phosphor screen ?new approach for quantitative analysis of FIM image-” Applied Surface Science, 76/77 1994/01 359
- “POSAP analysis of the oxide-ally interface in stainless steel” Applied Surface Science 76/77 1994/01 261
- “Potential and interest of nanolevel analysis using a three-dimensional atom probe” Tetsu to Hagane 1994/01 80 573 ～ 574
- “Microcharacterization of Aged Duplex Stainless Steel by Position Sensitive Atom Probe” APCFS’93, JSME-MMD, Tsuchiura 1993/07 745
- メスバウアー分光法によるFe-28Cr-5Ni合金中の2相分離相の組成決定 日本金属学会誌 1993/02 57 2 141 ～ 146
- “Analysis of oxide film on stainless steel via position sensitive atom probe” 40th National Symposium, American Vacuum Society, Florida, USA 1993/01 304
- “POSAP analysis of the oxide-alloy interface in stainless steel” The fifth topical quantitative surface analysis, American Vacuum Society, Florida, USA 1993/01 31
- “Phase decomposition of commercial duplex- and single-phase stainless steel” Nuclear Instruments and Methods in Physics Research 1993/01 76 290
- “フェライト組織を有するSUS329J2L鋼の2相分離過程” 日本金属学会誌 1993/01 57 5 509
- “経年模擬ステンレス鋼の機械的特性評価（第2報, アトムプローブによるステンレス鋼の時効組織の検出）” 日本機械学会論文集A編 1993/01 59 565 18 ～ 24
- “2相ステンレス鋼における時効によるフェライト相の相分離のアトムプローブによる検討” 日本金属学会誌 1992/01 56 8 873 ～ 880
- “時効による2相ステンレス鋼の電気化学的検討” 日本金属学会誌 1992/01 56 9 1037
- “MICROCHARACTERIZATION OF AGED FERRITIC STAINLESS STEEL” ASME Pressure Vessel Piping, San Diego, USA 1991/01 9
- “Microcharacterization of Aged Duplex Stainless Steel by Position Sensitive Atom Probe” International Conference on Stainless Steels, Chiba 1991/01 724
- “ATOM-PROBE ANALYSIS OF AGED DUPLEX STAINLESS STEEL” ISIJ 1991/01 1 724
- “MICROCHARACTERIZATION OF AGED FERRITIC STAINLESS STEEL” ASME PVP 1991/01 208 9
- “Mechanical Stimulated Outgassing from Stainless Steel Surface” Journal of Vacuum Science ＆ Technology 1991/01 93 2021
- “ステンレス鋼からのガス放出の温度依存性について” 真空 1991/01 34 3 283
- “フェライトステンレス鋼の時効脆化のアトムプローブによる検討(1) (Fe-28Cr-5Ni合金)” 日本機械学会論文集A編 1991/01 57 542 265 ～ 271
- “熱時効したステンレス鋼の電気化学的挙動” Zairyou-to-Kankyo 1991/01 40 674
- “鉄表面における水分子の吸着とその腐食への影響” Zairyo-to-Kankyo 1991/01 40 540
- “ATOM-PROBE CHARACTERIZATION OF AGED STAINLESS STEELS” The Winter Annual Meeting of ASME, Dallas, USA 1990/01 7A 220
- “ATOM-PROBE CHARACTERIZATION OF AGED STAINLESS STEEL” ASME PED 1990/01 46 77
- “ATOM-PROBE MICROCHARACTERIZATION OF NATIVE OXIDE ON SILICON” Solid-State Electronics, Supplement 1990/01 321
- “ステンレス鋼の極微小領域における組成ゆらぎと不動態皮膜のアトムプローブによる検討” Boshoku Gijutsu 1990/01 39 232
- “Atom-Probe Characterization of Aged Stainless Steels” 1st Hitachi European Symposium, Dusseldorf, FRG 1989/01 131 ～ 149
- “Atom-probe microcharacterization of native oxide on silicon Sixth International Symposium on passivity, Sapporo 1989/01 S7-4
- “Atom-Probe Microcharacterization of Grain Boundary Carbide Precipitation and Impurity Segregation in Type 304 Stainless Steel” Corrosion Engineering 1989/01 38 631
- “ステンレス鋼の粒界炭化物と粒界不純物偏析のアトムプローブによる検討” Boshuko Gijitsu 1989/01 38 586
- “械的負荷によるステンレス鋼表面からのガスの脱離放出” 真空 1988/01 31 5 459 ～ 462
- “An atom-probe study of passivated surface of a stainless steel” 34th International Field Emission Symposium, Osaka 1987/07 54
- “AN ATOM-PROBE STUDY OF PASSIVATED SURFACE OF STAINLESS STEEL” Journal de Physique 1987/01 48 C6-417
- “ステンレス鋼の吸着ガスの昇温脱離特性” 真空 1987/01 30 5 284
- “A Study of Surface Segregation of a Type 304 Stainless Steel by Atom-Probe” Journal de Physique, Colloque C7, supplement au n° 11, Tome 47 1986/11 C7-233
- “ATOM-PROBE STUDY OF MOLYBDENUM-CARBON REACTION” Journal de Physique 1986/01 47 C2-365
- “Atom-Probe study of hydrogen physisorption on aluminum and copper” Surface Science 1983/01 124 440
- “Atom-probe study of hydrogen chemisorption on iron and nickel” Surface Science 1983/01 133 15
- “Atom-probe study of the initial stage of silicide formation” Surface Science 1983/01 126 529
|
